Configure workers for session recording

Session recording requires that you configure at least one worker for local storage.

Requirements

Workers that you configure for storage must:

• Have access to the external storage provider
• Have an accessible directory defined by recording_storage_path for storing session recordings while they are in progress. On session closure, Boundary moves the local session recording to remote storage and deletes the local copy.
  • For HCP Boundary, refer to the Self-managed worker configuration documentation.
  • For Boundary Enterprise, refer to the refer to the worker configuration documentation.
• Have available disk space defined by recording_storage_minimum_available_capacity. If you do not configure the minimum available storage capacity, Boundary uses the default value of 500MiB. For more information about how much space is required to store BSR files, refer to storage considerations.
• Run Darwin, Windows, or Linux. The following binaries are not supported for session recording: NetBSD, OpenBSD, Solaris.

Local storage

Workers require sufficient local disk space in the recording_storage_path to store session recordings while they are in progress. Local disk space is also required for session recording playback.

The recording_storage_minimum_available_capacity vaule defines the minimum available disk space that must be available on the worker for session recording and session recording playback. This threshold determines the local storage state of the worker.

The possible storage states determined by the recording_storage_minimum_available_capacity are:

• Available: The worker is above the storage threshold and is available to proxy sessions that are enabled with session recording.

• Low storage: The worker is below the storage threshold. Existing sessions can continue without interruption, but new sessions that are enabled with session recording cannot be proxied. The worker is not available to record new sessions or play back existing recordings.

• Critically low storage: The worker is below half the storage threshold. Existing sessions that are enabled with session recording will be forcefully closed. The worker is not available to record new sessions or play back existing recordings.

• Out of storage: The worker is out of local disk space. It is not available to record new sessions or play back existing recordings. The worker is in a unrecoverable state. An administrator must intervene to remedy the issue.

• Not configured: The worker does not have a recording_storage_path configured.

• Unknown: The default local storage state of a worker. This state indicates that the local storage state of a worker is not yet known. Older workers (< 0.16.0) will be in this state.

If a worker is in an unhealthy local storage state, Boundary does not allow new session recordings or session recording playback until the worker is in an available local storage state.

Remote storage state

The workers that you configure for session recording storage must have access to the external object store. Workers report permission states back to Boundary, depending on the availability of the external object store. Boundary uses the permission states to determine what actions the worker can perform on the configured external storage.

Workers can have the following permission states:

• read: The worker can read from the external storage. It can also play back recorded sessions, if the permission state is ok.
• write: The worker can write to the external storage. It can also record sessions, if the permission state is ok.
• delete: The worker can delete data from the external storage. It can also clean up recorded sessions, if the permission state is ok.

Boundary uses the permission states to determine the remote storage state of a worker. The worker can have the following remote storage states:

• available: All permission states are healthy. The worker has the required access to the external storage.
• error: One or more of the permission sates are not healthy. Workers may not be able to perform certain actions on the external storage.

Boundary periodically checks the states of any workers that use the external storage, and then reports them back to the controller.

You can check the remote storage state of a worker using the boundary worker read -id $WORKER_ID command.

Worker information:
  Active Connection Count:   0
  Address:                   0.0.0.0:9202
  Created Time:              Tue, 04 Jun 2024 13:52:27 PDT
  ID:                        w_RPfBj239to
  Last Status Time:          2024-06-04 20:55:35.589282 +0000 UTC
  Local Storage State:       available
  Remote Storage State:
    sb_fhde575e:
        Status: available
        Permissions:
            Write: ok
            Read: ok
            Delete: ok
    sb_jksdgh4:
        Status: error
        Permissions:
            Write: error
            Read: ok
            Delete: ok
  Release Version:           Boundary v0.17.0+ent
  Type:                      pki
  Updated Time:              Tue, 04 Jun 2024 13:55:35 PDT
  Version:                   1

Example configuration

Refer to the following example configuration to configure workers for session recording storage:

worker {
  auth_storage_path      = "/boundary/demo-worker-1"
  initial_upstreams      = ["10.0.0.1"]
  recording_storage_path = "/local/storage/directory"
  recording_storage_minimum_available_capacity = "500MB"
}

Next steps

After you configure worker storage, you can configure the external storage provider for Amazon S3 or MinIO.